Super-Loosing& Smashing Cultivator FS770
Product Introduction
At present, China's farmland generally exist the problems: only ploughed without cultivation and maintenance, excessive use of chemical fertilizers, resulting in serious land caking, salinization and other problems. The FS550-21/FS770-30 deep smashing& loosening cultivator developed and produced by HBXG, utilizing a new type of farmland cultivation method, super crushing, deep ploughing and deep loosening, using multiple auger rods rotating at high speed into the ground up to about 50cm, physically crushing the land slab, the bottom layer of the plough, plant roots and stems into granule and stive instantly. It is a powerful tool for eliminating soil slabs. It effectively improves the soil environment and creates high-quality " Sponge type farmland ".
For the problem of soil salinisation, after the operation by the deep smashing and loosening culitvator, the soil is crushed and loosened, the water is flooded to settle the saline, which is deposited to the bottom of the deep ploughing layer, while the saline capillary channels are destroyed to avoid the phenomenon of anti-alkaline and to meet the crop growth conditions, comparing with the traditional tillage mode, the deepsmashing&loosening cultivator has a better alkali pressure effect.
Traditional rotary tillage technology has a shallow tillage layer, and continuous use for many years will lead to a reduction for the cooked soil layer, thickening of the plough bottom layer, deterioration for the aeration of the soil, a decrease for water permeability and a reduction in fertility. It is a revolutionary innovation for large-power agricultural machinery for outpower exceeding 550 horsepower, which broke through the traditional way of ploughing, retary cutting, harrowing and stubble clearance. The integrated operation can loosen the soil, thicken the tillage layer, improve the soil conditions respecting to the water, fertiliser, air and heat, change the soil's grain structure and create good soil conditions for crop growth and development.
The introduction of the Smashing& Loosening technology, and the theory of soil improvement
Multiple vertical helical drills go 50cm underground at high speed to activate deep soil
The auger bit with high-speed drive the oxygen into the soil, which makes the soil loosening, porosity increased and soil aeration enhancement
The high-speed rotary auger drills pulverize the soil into the uniform granular powder, It can activate soil and change soil hardening
The high-speed rotary auger drills can effectively pulverize straw and crop roots, speed up the decay rate and conducive to straw returning to the field
The high-speed rotary auger drills can destroy pests and eggs in soil by friction with soil particles
After smashing and loosening, it is good for water absorption, make the water storage increased and preserved the soil moisture
Compared with the traditional tillage, the effect by flooded to settle the saline-alkali is more obvious after treatment by smashing and loosening for the soil.


ENGINE
Model |
Weichai wpg770e302 |
Rated power |
566kw/2100r/min |
Max. torque |
3000m/1200~1500r/min |
Displacement |
16.72l |
Undercarriage system
Type |
triangle shape track,elevated sprocket,elastic suspended. |
Track width |
450 mm |
Track |
rubber track |
Track gauge |
2350mm |
Idler (each side) |
2 sets (2 units per set) |
Track roller(each side) |
2 sets(4 units per set) |


Driving system
Double circuit electric loop control hydrostatic driving system | |
Brake |
wet type multi-disc braking device |
Final drive |
2 stages planetary gear speed reduction final drive |
Travel speed |
0-13 km/h |
System flow |
2x252 l/min |
Max. working pressure |
40 Mpa |
Implement hydraulic system
Control method |
electric hydraulic control |
System output |
115l/min |
Maximum working pressure |
20 Mpa |
Smaching &scarifying hydraulic system
Control method |
electric hydraulic control |
System output |
720 l/Min |
Max. working pressure |
40 Mpa |
Rotary tillage device | |
Auger numbers |
6 sets |
Max. tilling depth |
700mm |
Tilling width |
3000 mm |
Max. rotation speed |
545r/min |