Super Loosing& Smashing Cultivator FS550
Product Introduction
Comparison tests of soil cultivation and plantation for Super Smashing and Loosening Cultivator have been conducted in more than 20 domestic provinces and regions. Covering more than 30 types of the crops, including rice, sugarcane, corn, wheat, and so on, it has demonstrated a obvious result of yield increase, which have great significance to increase the national grain output. Currently, the design level of the machinery is believed at the top position worldwide.
The presentation of the Super Smashing and Loosening Cultivator revolutionarily changes the traditional farmland cultivation type. Under the premise of not disordering the soil layer, vertical helical drill goes deeply into the soil layer to pierce and smash soil transversely with high speed, and improve the soil hardening conditions. The smashed and loosened soil layer increases aeration and water absorbing ability, enables crops to fully absorb nutrients from the soil and effectively promote the growth of the crops, and achieves the purpose of increasing yields and income finally.
The introduction of the Smashing& Loosening technology, and the theory of soil improvement
Multiple vertical helical drills go 50cm underground at high speed to activate deep soil
The auger bit with high-speed drive the oxygen into the soil, which makes the soil loosening, porosity increased and soil aeration enhancement
The high-speed rotary auger drills pulverize the soil into the uniform granular powder, It can activate soil and change soil hardening
The high-speed rotary auger drills can effectively pulverize straw and crop roots, speed up the decay rate and conducive to straw returning to the field
The high-speed rotary auger drills can destroy pests and eggs in soil by friction with soil particles
After smashing and loosening, it is good for water absorption, make the water storage increased and preserved the soil moisture
Compared with the traditional tillage, the effect by flooded to settle the saline-alkali is more obvious after treatment by smashing and loosening for the soil.
ENGINE
Model |
Dongfeng Cummins QSZ13-C550-Ⅲ |
Rated power |
410 kw/1900r/min |
Max. Torque |
2300N.m/1200~1700r/min |
Displacement |
13L |
Undercarriage
Track width |
450 mm |
Track |
Rubber track |
Track gauge |
1650mm |
Carrier roller(single side) |
2 pcs |
Track roller(single side) |
6 pcs |
Idler(single side) |
1 piece |
Travel Tansmission Hydraulic system
Double circuit loop electric control hydrostatic driving system | |
Brake |
wet type multi-disc braking device |
Final drive |
two stages planetary gear speed reduction final drive. |
Travel speed |
0-5.5 km/h |
Max. working pressure |
40 Mpa |
Implement hydraulic system
Control method |
electric hydraulic control |
System flow |
115L/MIN |
Max. working pressure |
20 Mpa |
Smashing & scarifying hydraulic system
Control way |
electric hydraulic control |
System flow |
480 L/MIN |
Max. working pressure |
40 Mpa |
Rotary tillage device
Rotary tillage device | |
Auger |
6 sets |
Max. tilling depth |
500mm |
Tilling width |
2100 mm |
Max. rotating speed |
506r/min |